FA Italia

Engine bearing for the Vespa PX 80/125/200 crankshaft clutch side.

Brake cable for the front wheel brake. Complete with casing. Attached to the brake at the bottom using threads.

Front brake drum for the Vespa 50, PV, and ET3. If the old brake drum has noticeable grooves or runs unevenly, it should be replaced to ensure the...

Front brake drum for Vespa V50 and PV. Suitable for closed 4-hole rims with 9" or 10" rim.

Brake drum hub for closed 4-hole rims of the Vespa V50.

Rear brake drum for the Vespa V50 and PV 125. This brake drum is intended as a replacement part for all models with an open 5-hole 10" rim, including...

Brake drum for the rear wheel of the Vespa PX 80/125/200 E model. Suitable for Vespa scooters with a 27mm oil seal on the rear wheel.

Rear brake drum made in Italy for Vespa PX 80/125/200. Suitable for 30mm oil seal.

Rear brake drum by FA Italia for Vespa PK 50 S, XL1, and XL2. If the old drum has grooves or knocks during braking, it should be replaced to ensure...

Brake light switch for the brake pedal of the Vespa PK and PX. Also needed when converting the Vespa V50 / PV 125 to contactless ignition.

Brake light switch for the brake pedal of the Vespa V50, PV and more. Opener type for contact ignitions.

Brake pads from FA Italia for the front brake of Vespa Cosa 125/200.

Front brake pads from FA Italia for Vespa Sprint, GT 125, GS 150, 160 Rally, and more.

Brake pads made in Italy by FA Italia. Suitable for Vespa: PK 50 /80 /125 S-XL2 front PK 50 /80 /125 S-XL2 rear PX old/Lusso 80 /125 /200 front PX...

Brand brake pads for the rear of the Vespa V50 and Primavera 125.

The brake pedal rubber ensures that the brake remains well controllable and prevents the foot from slipping off the brake pedal. Suitable for the...

Square-shaped brake pedal for the Vespa PK 50-125 S/XL/XL2, later Vespa V50 and Vespa V50 Special, as well as PX Alt and Lusso.

Bremsbeläge für die Vespa Cosa Hinterradbremse.

Bremsbeläge für die Hinterradbremse der Vespa V50 1.Serie mit 9" Felgen.

Sturdy main stand for the Vespa Cosa 125/200. Comes with rubber feet.

Main Stand black for all Vespa PK. Delivery including main stand rubbers.

Galvanized main stand for Vespa V50 1st Series with 16mm diameter. Delivery does not include stand rubbers.

Clutch gear with 22 teeth for Vespa Cosa2 clutch. This primary gear is often swapped with the original gear when using a DR 135 or Malossi 139 to...

Clutch gear with 22 teeth for Vespa PX 80 / 125 clutch. This primary gear is often swapped with the original 20-tooth gear when using a DR 135 or...