Roller aus Blech

OEM air filter for the Dellorto Si 20.17 carburetor of the Vespa Sprint and VNB. The air filter is also suitable for the Si 20.15 of the Vespa VNB.

Brand bearing for the clutch side suitable for all Vespa V50, PV, PK. C3 clearance. For use on the crankshaft.

High-quality bearing made in Europe for all Vespa V50, PV, PK models. For the Flywheel side. C3 clearance for use on the crankshaft.

Ball bearing NU204 in cylindrical roller bearing design. The NU204 is a separate ball bearing consisting of an outer ring with cylindrical rollers...

This conversion branded bearing is intended to allow an ETS crankshaft to be installed in a standard Vespa PK 50-125, PV, or V50 engine housing....

Standard ball bearing for Vespa V50, PV, and PK 50-125 S-XL-XL2. The ball bearing fits the layshaft on the clutch side.

Ball bearing for Vespa V50, PV, and PK 50-125 S-XL-XL2. This ball bearing fits the layshaft on the Flywheel side.

Bearing for the Vespa PX 200 and Cosa 200 Layshaft.

Quality bearing set with oil seals for the crankshaft of the Vespa PX Arcobaleno. Scope of Delivery Clutch-side bearing Flywheel-side bearing...

Quality bearing set with oil seals for the crankshaft of the Vespa PX E. Scope of Delivery Clutch-side bearing Flywheel-side bearing Partially...

Ball bearing set for Vespa engine overhaul. Compatible with the following Vespa engines: Vespa V50 / V50 Special Vespa PV125 / ET3 Vespa PK50...

Clamp plate set with clamping screw for the front brake of the Vespa V50, PV, PK, PX, Sprint, and more.

Buld 35 Watts for Vespa PX. ba20d.

Handlebar levers usually require a barrel-end fitting. This pear nipple adapter allows the installation of a clutch or brake cable that has a...

The cable holder plate ensures a secure fit of the outer cable housings inside the handlebar. For earlier models (check before what you need): V50...

Carburetor bowl cover for Si carburetor without separate lubrication. The cover fits, among others, for the carburetor bowl of Vespa models PX E...

Castle Nut tool for the safe removal of the Vespa PX 80/125/200 clutch.

The retaining ring is intended for removing the V50 / PV 125 / ET3 flywheel.

The circlip secures the primary basket of the Vespa V50, PV, and PK in the main bearing of the crankshaft. Circlips lose their original shape through...

High-quality INOX clamp with dimensions 25-40mm for the Malossi PHBL 25 carburetor connection rubber. Suitable for Vespa PK 50 S-XL2 and V50 / PV 125.

The mounting clamp ensures a secure connection between the cylinder cover. Suitable for Vespa V50, PK 50 S, XL, XL2, PX E, PX Arcobaleno and more.

The mounting clamp ensures a secure fit of the Vespa V50, PV 125 and Sprint horn on the chassis.

Clamp for Vespa V50 Special, PK, PX horn cover.

Spring washer made of spring steel for the clutch nut of the Cosa 2. High quality from the German tool wholesale. Special Features Material: Spring...