Freno, Tambor, Brazo Oscilante

Speedometer worm gear, 12 teeth, 12mm, gray, for Vespa PX and Cosa.

Brake cable for the front wheel brake. Complete with casing. Attached to the brake at the bottom using threads.

Rear brake cable complete with casing for the rear wheel brake. The brake cable is attached to the brake pedal with an eyelet.

Rear brake cable with casing for the rear wheel brake. Complete with casing. For crimping attachment, without eyelet.

Complete clamp plate set with clamping screw for the rear brake of various Vespa models such as PK 50 S-XL2, V50, PV, PX, Sprint, and more, in very...

Brake drum for the rear wheel of the Vespa PX 80/125/200 E model. Suitable for Vespa scooters with a 27mm oil seal on the rear wheel.

Rear brake drum made in Italy for Vespa PX 80/125/200. Suitable for 30mm oil seal.

Stud bolt for Vespa PK, V50, PV, PX and Cosa brake drum.

Brake pads from FA Italia for the front brake of Vespa Cosa 125/200.

Front brake pads from FA Italia for Vespa Sprint, GT 125, GS 150, 160 Rally, and more.

Brake pads made in Italy by FA Italia. Suitable for Vespa: PK 50 /80 /125 S-XL2 front PK 50 /80 /125 S-XL2 rear PX old/Lusso 80 /125 /200 front PX...

Clamp nut for the frame of the Vespa V50, PK, and PX for attaching the brake pedal base plate.

The brake pedal rubber ensures that the brake remains well controllable and prevents the foot from slipping off the brake pedal. Suitable for the...

Brake pedal rubber for the square brake pedal of the Vespa PK, PX, and later V50 / V50 Special.

Rubber stop for the square brake pedal of the Vespa V50, PK, and PX.

Square-shaped brake pedal for the Vespa PK 50-125 S/XL/XL2, later Vespa V50 and Vespa V50 Special, as well as PX Alt and Lusso.

The brake return spring is responsible for returning the brake pads to their original position and resetting them to the brake cam. Fits front brake...

The return spring is responsible for returning the brake pads to the original position against the brake cam in the front wheel brake. The return...

Rückholfeder für den Bremsarm der Hinterradbremse der Vespa PX, Rally und Sprint.

Bremsbeläge für die Vespa Cosa Hinterradbremse.

Security compression rubber for attaching the Vespa PK S/XL und PX/T5 speedometer cable to the swing arm.

Safety cotter pin for the clamp plates on front and rear wheels of various Vespa models such as V50, PK 50 S-XL2, PX 80-200, etc.

3.2mm cotter pin in good quality for front and rear wheels Fits Vespa V50 Vespa PX E uvm.

4.0mm cotter pin in good quality for front and rear wheels Fits Vespa PK S-XL2 Vespa PX Arcobaleno uvm.