Esta subcategoría incluye piezas como mitades del motor y componentes, rodamientos y conjuntos de rodamientos, así como todas las juntas necesarias para los motores Vespa V50 y PK.
Motor, cojinetes, juntas
Bearing Crankshaft Clutch Side C3 OEM Vespa V50, PV, PK
Brand bearing for the clutch side suitable for all Vespa V50, PV, PK. C3 clearance. For use on the crankshaft.
OEM
Bearing Crankshaft Clutch Side C3 SKF Vespa V50, PV, PK
SKF brand bearing for the clutch side of the following Vespa engine casings: PK 50 XL2 PK 50 S/XL PK 80 / PK 125 V50, V50 Special PV / ET3 The ball...
SKF
... más info
Bearing Crankshaft Flywheel Side C3 FAG Vespa V50, PV, PK
High-quality FAG bearing for the Flywheel side of Vespa V50, PV, and PK models. Optimal C3 clearance for use on the crankshaft.
FAG / INA
Bearing Crankshaft Flywheel Side C3 OEM Vespa V50, PV, PK
High-quality bearing made in Europe for all Vespa V50, PV, PK models. For the Flywheel side. C3 clearance for use on the crankshaft.
OEM
... más info
Bearing Crankshaft Flywheel Side C3 SKF Vespa V50, PV, PK
High-quality SKF bearing for the Flywheel side of all V50, PV, and PK models. Optimal C3 clearance for use on the crankshaft.
SKF
... más info
Bearing Crankshaft Flywheel Side NU204 OEM Vespa V50, PK 50 S-XL2
Ball bearing NU204 in cylindrical roller bearing design. The NU204 is a separate ball bearing consisting of an outer ring with cylindrical rollers...
OEM
... más info
Bearing ETS Conversion Crankshaft Flywheel Side Vespa PK 50-125 PV
This conversion branded bearing is intended to allow an ETS crankshaft to be installed in a standard Vespa PK 50-125, PV, or V50 engine housing....
DE Wholesale
... más info
Bearing Layshaft Clutch Side OEM Vespa V50, PV, PK
Standard ball bearing for Vespa V50, PV, and PK 50-125 S-XL-XL2. The ball bearing fits the layshaft on the clutch side.
OEM
Bearing Layshaft Clutch Side SKF Vespa V50, PV, PK
High-quality SKF ball bearing for the layshaft of Vespa V50/PV and PK 50/80/125 S-XL2.
SKF
Bearing Layshaft Flywheel Side FAG V50, PV, PK
High-quality FAG ball bearing for the layshaft on the Flywheel side of Vespa V50, PV, PK.
FAG / INA
Bearing Layshaft Flywheel Side OEM Vespa V50, PV, PK
Ball bearing for Vespa V50, PV, and PK 50-125 S-XL-XL2. This ball bearing fits the layshaft on the Flywheel side.
OEM
Bearing Rear Wheel clutch side FAG Vespa V50, PK, PX, Cosa
Quality FAG ball bearings for the Vespa rear wheel / clutch side . Open design as in the original equipment. FAG ball bearings are of the highest...
FAG / INA
Bearing Rear Wheel Flywheel Side INA Vespa PK, V50, PV
High-quality rear wheel needle bearing by FAG / INA for Flywheel side of Vespa models: V50 50N PV 125 ET3 PK 50 S - XL2 PK 50 Lusso PK 80-125
ina Italy
Bracket Cables Vespa V50, PV
Bracket for the cables of the Vespa V50, V50 Special, and PV. Complete with adjusting screw for the clutch cable and pass-through for the brake cable...
Olympia
Brake Anchor Plate Gasket Rear Wheel Vespa V50/PV, PK 50 S-XL2
Paper gasket for the brake anchor plate of the Vespa V50, PV, and PK 50/80/125 S-XL2. Tip: In case of leaks, especially at this point, the snap rings...
Made in Italy
Circlip Flywheel Vespa V50, PV 125, ET3
The retaining ring is intended for removing the V50 / PV 125 / ET3 flywheel.
DE Wholesale
Circlip Primary Driven Gear Vespa V50, PV, PK
The circlip secures the primary basket of the Vespa V50, PV, and PK in the main bearing of the crankshaft. Circlips lose their original shape through...
DE Wholesale
Cylinder base gasket sheet Vespa PK, V50, PV 125
Metal cylinder base gasket. Suitable for all Vespa PK and V50 models.
Made in Italy
Cylinder base gasket Vespa PK, V50, PV
New paper cylinder base gasket made of sealing material.
Made in Italy
Cylinder stud bolt Vespa PV, PK 125, PX 125
Long cylinder stud bolt for Vespa PV, PK 80-125 and PX 80-125.
Made in Italy
Engine Bolt Screw for Silentblock OLYMPIA Vespa PK, PV, V50
Engine Bolt Screw by Olympia for all Vespa PK, V50, PV 125 and ET3.
Olympia
... más info
Engine Bolts SET M7 33 pcs. Vespa PK, V50, PV
Complete set of engine bolts (11 bolts) by Olympia for Vespa V50, PK engine casing. Total 33 pcs.
Olympia
... más info
Exhaust Gasket Vespa PK 125 XL/XL2
Exhaust gasket for the long-stroke cylinder of the Vespa PK 125 XL/XL2.
Made in Italy
Exhaust Gasket Vespa V50, PK 50 S-XL2
Exhaust manifold and muffler gasket for Vespa V50 and PK 50 S-XL2.
Made in Italy