Brakes

The larger of the two ball bearings in the front wheel swingarm of the Vespa V50 / PV 125.

The smaller of two ball bearings in the Vespa V50 swingarm and the front wheel of the Vespa PX Brand quality from SKF.

Paper gasket for the brake anchor plate of the Vespa V50, PV, and PK 50/80/125 S-XL2. Tip: In case of leaks, especially at this point, the snap rings...

M7 adjustment screw for adjusting the brakes of various Vespa models like: V50 PK PX Sprint and many more. Delivery includes lock nut.

Brake cable for the front wheel brake. Complete with casing. Attached to the brake at the bottom using threads.

Rear brake cable complete with casing for the rear wheel brake. The brake cable is attached to the brake pedal with an eyelet.

Rear brake cable with casing for the rear wheel brake. Complete with casing. For crimping attachment, without eyelet.

Complete clamp plate set with clamping screw for the rear brake of various Vespa models such as PK 50 S-XL2, V50, PV, PX, Sprint, and more, in very...

Clamp plate set with clamping screw for the front brake of the Vespa V50, PV, PK, PX, Sprint, and more.

Clamp plate set with clamping screw for the front brake of the Vespa V50, PV, PK, PX, Sprint, and more, made in Italy.

Front brake drum for the Vespa 50, PV, and ET3. If the old brake drum has noticeable grooves or runs unevenly, it should be replaced to ensure the...

Front brake drum for Vespa V50 and PV. Suitable for closed 4-hole rims with 9" or 10" rim.

Brake drum hub for closed 4-hole rims of the Vespa V50.

Rear brake drum mount for closed 4-hole rims of the Vespa V50 and PV 125 Primavera. For 9" and 10" conversion rims

Rear brake drum for the Vespa V50 and PV 125. This brake drum is intended as a replacement part for all models with an open 5-hole 10" rim, including...

Rear brake drum for Vespa V50 and PV. Suitable for closed 4-hole rims.

Rear brake drum by FA Italia for Vespa PK 50 S, XL1, and XL2. If the old drum has grooves or knocks during braking, it should be replaced to ensure...

Brake pads made in Italy by FA Italia. Suitable for Vespa: PK 50 /80 /125 S-XL2 front PK 50 /80 /125 S-XL2 rear PX old/Lusso 80 /125 /200 front PX...

Brand brake pads for the rear of the Vespa V50 and Primavera 125.

Brake pads for the rear brake of the Vespa V50 1st series with 9" rims.

Front brake pads for the Vespa V50 and PV 125 front brakes. Suitable for 9" and 10" models. Consequently suitable for all Vespa V50 and 125cc model...

Clamp nut for the frame of the Vespa V50, PK, and PX for attaching the brake pedal base plate.

The brake pedal rubber ensures that the brake remains well controllable and prevents the foot from slipping off the brake pedal. Suitable for the...

The brake pedal rubber ensures that the brake remains well controllable and prevents the foot from slipping off the brake pedal. For the round (see...